Save all warnings and instructions for future reference. Cluttered or dark areas invite accidents.
Power tools create sparks which may ignite the dust or fumes. Distractions can cause you to lose control.
GSB 19 2 RE, 780 Bosch RE
Electrical safety fPower tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Látták: Átírás 1 Nagyaukció képeslapok Az árverés anyaga megtekinthető weboldalunkon és irodánkban VI.
There is an increased risk of electric shock if your body is earthed or grounded. Water entering a power tool will increase the risk of electric shock. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, monteur de grue suisse anti aging, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.
Use of a cord suitable for outdoor use reduces the risk of electric shock. Use of an RCD reduces the risk of electric shock. Personal safety fStay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while op- erating power tools may result in serious personal injury. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal inju- ries.
Carrying power tools with your finger on the switch or en- ergising power tools that have the switch on invites acci- dents. A wrench or a key left attached to a ro- tating part of the power tool may result in personal injury. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Do not wear loose clothing or jewel- lery.
Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. Use of dust collection can re- duce dust-related hazards. Power tool use and care huzattól bedagadt szem not force the power tool.
Cluttered or dark areas invite accidents. Power tools create sparks which may ignite the dust or fumes. Distractions can cause you to lose control. Electrical safety fPower tool plugs must match the outlet.
Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Such preventive safety measures reduce the risk of starting the power tool accidentally. Power tools are dangerous in the hands of untrained users. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use of the power tool for operations different napra sötétedő szemüveg those intended could result in a hazardous situation. Service fHave your power tool serviced by a qualified repair per- son using only identical replacement parts.
This will en- sure that the safety of the power tool is maintained. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Operations for which the power tool was not designed may create a hazard and cause personal injury. Just because the accessory can be attached to your power tool, it does not assure safe operation. Ac- cessories running faster than their rated speed can break and fly apart. Incorrectly sized accessories cannot be adequately guarded or controlled.
Accessories with arbor holes that do monteur de grue suisse anti aging match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of con- trol. Before each use in- spect the accessory such as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or in- stall an undamaged accessory. After inspecting and in- stalling an accessory, position yourself and bystanders away from the plane of the rotating accessory and run the power tool at maximum no-load speed for one minute.
Damaged accessories will normally break apart during this test time. Depending on application, use face shield, safety goggles or safety glasses.
As appropriate, wear dust mask, hearing pro- tectors, gloves and workshop apron capable of stop- ping small abrasive or workpiece fragments.
The eye protection must be capable of stopping flying debris gen- erated by various operations. The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high intensity noise may cause hearing loss. Anyone entering the work area must wear personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate area of operation.
If you lose control of the power tool, the cord may be cut or snagged and your hand or arm may be pulled into the spin- ning accessory.
The spinning accessory may grab the surface and pull the power tool out of your control. Accidental contact with the spinning accessory could snag your clothing, pulling monteur de grue suisse anti aging accessory into your body. Sparks could ignite these materials. Us- ing water or other liquid coolants may result in electrocu- tion or shock.
For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of the wheel that is entering into the pinch point can dig into the surface of the material causing the wheel to climb out or kick out.
Abrasive wheels may also break under these condi- tions. Al- ways use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up.
The operator can control torque reactions or kickback forces, if proper precautions are taken. Ac- cessory may kickback over your hand. Avoid bouncing and snagging the accessory. Cor- ners, sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.
Such blades create frequent kickback and loss of control over the power tool. Additional safety instructions for grinding fUse only wheel types that are recommended for your power tool and the specific guard designed for the se- lected wheel.
Wheels for which the power tool was not de- signed cannot be adequately guarded and are unsafe. For example: do not grind with the side of the cut-off wheel. Abrasive cut-off wheels are intended for peripheral grinding; side forces applied to these wheels may cause them to shatter. Proper wheel flanges support the wheel thus reducing the possi- bility of wheel breakage. Flanges for cut-off wheels may be different from grinding wheel flanges.
Wheels intended for larger power tools are not suitable for the higher speed of a smaller tool and may burst. Additional safety warnings fUse suitable detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to explo- sion.
Penetrating a water line causes property damage or may cause an electric shock. This anti aging éjszakai rutin ősz vents uncontrolled restarting.
A workpiece clamped with clamp- ing devices or in a vice is held more secure than by hand. If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an author- ised customer service agent.
- Svájci anti aging gél ételfesték
- Элли призналась матери, что после ее возвращения Роберт вел себя весьма - Он даже ни разу не заинтересовался мной как женщиной, - с горечью в голосе сказала .
The replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains sock- et elsewhere. Product Description and Specifications Read all safety warnings and all instruc- tions. While reading the operating instructions, unfold the graphics page for the machine and leave it open. Intended Use The machine is designed for grinding and deburring metal us- ing corundum grinding tools, as well as for working with sand- ing wheels.